Digging Without the Damage
Digging Without the Damage: Why Contractors Are Choosing Non-Destructive Methods
When you’re digging in a plain bit of ground there’s no problem. But it’s a different matter if there’s a gas pipe, an electrical cable, a water main or a telecommunications line somewhere below it.
How does non-destructive digging actually work?
This part is fairly cunning but definitely not difficult.
During the hydro excavation process, water at high pressure is shot into the ground causing the soil to become loosened. The loosened material is then vacuumed away and placed in a tank on the excavation truck.
This means that the operator can be within a lot more focused region than they might be with traditional excavation plant.
NDD which uses compressed air rather than water. The choice between this and the water method depends on the site, the material being excavated and what surrounds the work area.
It can mean less mess and disruption
Here’s another reason the NDD may be attractive to contractors: There’s no requirement that you have to cut up half of the job site to access a fairly modest area.
Vacuum excavation allows for more precise excavation in these areas:
- Roads and footpaths
- Paved areas and driveways
- Landscaping and established gardens
- Existing structures
- Confined work sites
- Other sensitive areas
Furthermore, all the excavated material is deposited back in the vacuum truck instead of being spread out to form large mounds.
That comes especially in handy when you are working in a tight space or in a place where you’d like to make sure everything in your immediate work area is kept a little more organized.
There’s more to NDD than finding pipes
Service locating is probably the most recognised application of NDD but it’s certainly not the only one.
Depending on the project, contractors may use non-destructive excavation for:
- Potholing and utility exposure
- Trenching
- Pole and signpost construction
- Work on electrical and communications
- Gas and water investigations
- Pile hole excavation
- Pit cleaning
- Line installation
- Excavation around tree roots
An example would be working about existing trees. Heavy equipment in the root zone is one way to loosen the soil to expose it, but it’s harsh. Contractors can gain more control in excavations by exposing roots when excavating in sensitive areas.
So, what does this all mean for the project?
The real advantage is not just that NDD is another way of digging. It’s what that control can mean for the remainder of the job.
The smaller, more specialized excavation may allow less ground to be replaced afterwards. This may be advantageous when the excavation passes through concrete, asphalt, lawns or other finished areas.
And the headaches can be fewer even if we can uncover the underground tooled using gentle means.
Keep in mind that not every job will benefit from NDD, naturally, in terms of cost or time reduction. If you’re transporting a lot of uncontaminated soil that’s far from sensitive infrastructure, traditional excavation might be the prudent choice.
It is about selecting the proper instrument for the conditions.
Why it makes sense on complicated sites
Controlled excavation can be invaluable where the work area is more congested.
The contractor is limited to working around existing services, within a tight Access space, or around built infrastructure. NDD can allow soil removal to be more precise.
It can also eliminate some of the manual digging around underground services, but it does not eliminate the need for planning, locating and safe work practices.
That’s a key difference. NDD minimizes the risk of hitting underground facilities, but it isn’t always foolproof.
Good excavation starts before the digging
The vacuum truck isn’t the first step.
Contractors are still required to assess the location, locate registered underground services and adhere to the appropriate requirements prior to excavating. Locating underground services before you dig Australia (BYDA) is a key step in conducting work around underground infrastructure in Australia.
When you understand more about what exists beneath the surface, you can decide if NDD is suitable for limited excavation.
The good info on the job, then, the right excavator for the job.
So why are contractors opting for NDD?
Let’s not kid ourselves, non-destructive digging isn’t the solution to every excavation project. It’s not.
However, if you are doing work around underground services, pre-existing infrastructure, in cramped areas or in ground where disturbing unnecessary ground will generate more work – knowing you can excavate accurately has its obvious benefits.
This is the reason why a lot of civil contractors rely on the utility vacuum excavation services, which will help perform service locating, potholing, trenching, pit cleaning and many other civil construction works.
Occasionally, the best decision you can make to dig is not to bring out a larger, more powerful machine. It’s to have a clearer picture of what lurks below the surface before you begin.



















